TRUMPF TruTool TPC 165

With the panel cutter, you can produce precise and perpendicular interior cutouts and notches right away. For panel thicknesses up to 6.5 inches.

Perfect cuts straight away

With the TruTool TPC 165 panel cutter, you can cut sandwich panels up to a thickness of 6.5 in. The blade insertion mechanism enables the production of accurate, perpendicular interior cutouts and notches. In one operation. The machine is ready for operation without presettings. Simply select the correct blade position and begin cutting. The TruTool TPC 165 can cut panels regardless of whether the surface is flat, trapezoidal, or corrugated.

Perpendicular cuts

Swiveling 90° blade, well-suited for perpendicular cutouts with a depth of up to 6.5 inches.

Unique

With the insertion mechanism, you can start at any position on the panels.

Up to four meters per minute

You can cut the upper and lower sheets in one press operation, without the need for reworking.

Compact and light

The TruTool TPC 165 weighs just 9.6 kg and is based on a sheet design that is both stable and light.

Panel cutter  
Maximum panel thickness 165 mm
Maximum individual material thickness for steel up to 400 N/mm² 0.9 mm
Insulation material Polyurethane foam, polyisocyanurate foam
Smallest possible opening by piercing 340 mm x 340 mm
General  
Working speed (max.) 4 m/min
Cutting track width 4 mm
Nominal power consumption 1600 W
Dimensions  
Length 493 mm
Height 231 mm
Weight  
Weight 9.6 kg

Order a call

Full Name: *

Phone: *