TRUMPF TruTool TKA 1500

Uncompromisingly good edges

The TruTool TKA 1500 is equipped with a powerful and robust 2600 W motor, which at the same time will impress you with its extremely low noise level and enable you to work without getting tired. The resulting stable machine guidance in combination with the ergonomic guide and motor handle also has a positive effect on the chamfer quality. You can create chamfer lengths of up to 15 mm and fix them in a continuously adjustable manner and without tools. The result: high-quality, repeatable edges right away - without rework. With the TruTool TKA 1500 you can create clean visible edges, break off sharp edges, add a radius or prepare a weld seam. Any oxidation or deformation of the material is avoided.

Ergonomic operation

The handle shape, size and positioning are perfectly matched to each other. This not only ensures safe machine guidance, but also supports the chamfer quality.

In the blink of an eye

Chamfer lengths can be set as required without the need for any tools, with a max. ¾ manual turn. In this way, you have a clear view of the dial ring

Consistent edge quality

High-quality results with burr- and oxide-free surfaces, without material change and at a constant angle adjustment.

Versatile use

For straight edges, inner and outer contours and holes from 80 mm.

Simply get started

The stop prism ensures easy run-in to the sheet metal for straight sheet metal and when processing outer contours.

2 in 1

At the same time, the stop prism acts as chip protection. The chips fall on the floor in a controlled manner, ensuring a high level of occupational safety.

	TruTool TKA 1500 without tool	TruTool TKA 1500 45° tool
Maximum chamfer lengths / Maximum chamfer heights
Maximum chamfer length, steel 400 N/mm²	15 mm	15 mm
Maximum chamfer height, steel 400 N/mm²	10.6 mm	10.6 mm
Maximum chamfer length, steel 600 N/mm²	12 mm	12 mm
Maximum chamfer height, steel 600 N/mm²	8.5 mm	8.5 mm
Maximum chamfer length, steel 800 N/mm²	10 mm	10 mm
Maximum chamfer height, steel 800 N/mm²	7.1 mm	7.1 mm
Maximum chamfer length, aluminium 250 N/mm²	15 mm	15 mm
Maximum chamfer height, aluminium 250 N/mm²	10.6 mm	10.6 mm
Radii
Smallest inner radius	30 mm	30 mm
Smallest bore hole (Ø)	55 mm	55 mm
General
Minimum sheet thickness	3 mm + hs	3 mm + hs
Working speed (max.)	1.5 m/min	1.5 m/min
Nominal power consumption	2600 W	2600 W
Dimensions
Length	679 mm	679 mm
Height	197 mm	197 mm
Weight
Weight	10 kg	10 kg