TRUMPF TruTool F 125
You can use the TruTool F 125 seam locker to lock prepared angle and standing seams with flange heights of up to 1.57 in, even on tight corners and edges.
For closing angle and standing seams
The TruTool F 125 closes angle and standing seams with a spring-loaded hammer. This gives you tightly closed seams with consistent quality, even with variations in sheet thickness. The maximum seam height is 1.57 in. The free-standing tool allows you to work well even in tight corners and angles.For angle and standing seams
Close the seam with consistently high quality, even in corners and angles.Can be adjusted without tools
The sheet and seam thickness are controlled manually and minor variations in sheet thickness are evened out.| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 1.25 mm |
| General | |
| Flange height (H) | 40 mm |
| Maximum fold thickness | 5 mm |
| Working speed (max.) | 6 m/min |
| Nominal power consumption | 550 W |
| Dimensions | |
| Length | 279 mm |
| Height | 149 mm |
| Weight | |
| Weight | 2.8 kg |