Plasma Cutting Machines

OMNIAtech is the perfect combination of multifunctional technologies to permit any kind of cutting and mechanical applications on steelplate. The new OMNIAtech from Soitaab is a versatile, multi-toolsystem, permitting multiple operations such as: thermal cutting, marking, drilling, tapping, countersinking and milling.

Plasma NOVA is the only solution in the market that integrates multiple technologies and features to meet the most complex production requirements. In a single set-up, this machine can allow the completion of many complex operations thus optimizing the production cycle. Versatile and with a wide variety of application, it is designed to cut ferrous, stainless steel and aluminum materials. 

Designed to meet the need for quality and economical thermal cutting, LineaTech PRO offers various possibilities for applications such as flame cutting, plasma cutting and marking.

LineaTech PRO is a longitudinal twin motors with brushless motors and digital drives. The movement is achieved by mating rack and pinion and floating device and preloaded spring.

The RED model has a structure with double beam; a front transverse slide through the carriages on two linear guides, a rear reinforcement.

LineaTech RED offers various possibilities for applications such as flame cutting, plasma cutting, marking and pre-drilling mechanical device. LineaTech RED is a longitudinal twin motors with brushless motors and digital drives in absolute coordinates. The movement is achieved by mating rack and pinion and floating device and preloaded spring.

It offers a wide range of solutions for plasma cutting, flame cutting, drilling/tapping and marking. Designed with a modular concept which makes it a versatile machine for excellence through the use of mechanical and electronic solutions of the last generation; all in perfect harmony then managed by dedicated software developed entirely by Soitaab. 

The portal of LineaTech NOVA is double beam: a front transverse slide through the carriages on two linear guides are protected by a metal cover and arranged in L and a back support and reinforcement.

It follows that the LineaTech NOVA is the right response to the needs of various kinds of steel structures. In fact, starting from a basic configuration, this can be set up immediately or at a later time with extreme ease, with various devices such as; heads for cutting bevel with both plasma torch cutting heads for drilling and tapping up to ISO40, tool changes and markers of various types and others that can be examined specifically.

The TUBO LINECUT, suitable for cutting round, square and rectangular tubes.

The TUBO LINECUT can be manual or automatic and equipped according to the various cutting needs.