Salvagnini PX
The PX natively combines productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools.
The PX uses universal bending tools which automatically adapt in-cycle to the panel geometry, without machine down times or manual retooling, allowing batch-one or kit productions.
Safe technology
The panel bender is CE marked, to guarantee maximum safety for the operator. The loading and unloading operations are controlled by optical light barriers, which stop the cycle if necessary.
Intelligent configurability
The PX natively includes the CI interface, for integrating a loading/unloading robot on the left-hand side of the machine. To set it up, remove the side wall facing the robot by hand and then install it in the opposite wall for safety reasons.
Connectivity 4.0
The proprietary LINKS, STREAM and OPS softwares establish communication between the system and the company departments involved in the production flow.
Adaptive system
The integrated adaptive technologies (bending formula, MAC3.0) make the system intelligent and able to automatically adapt to changes in the material and the external environment, eliminating waste and corrections, and extending the range of products that can be made.
| Model | PX |
|---|---|
| Maximum length of incoming sheet (mm) | 2495 |
| Maximum width of incoming sheet (mm) | 1600 |
| Maximum diagonal that can be rotated (mm) | 2500 |
| Maximum bending length (mm) | 2180 |
| Maximum bending height (mm) | 203 |
| Maximum bending force (kN) | 330 |
| Maximum clamping force (kN) | 530 |
| Minimum thickness (mm) | 0.5 |
| Maximum thickness and bending angle (steel, UTS 410 N/mm²) | 2.5 (±90°), 1.6 (±120°), 1 (±125°) |
| Maximum thickness and bending angle (stainless steel, UTS 660 N/mm²) | 2.1 (±90°), 1.25 (±120°), 1 (±125°) |
| Maximum thickness and bending angle (aluminium, UTS 265 N/mm²) | 3.5 (±90°), 2.5 (±120°), 2.1 (±125°) |
| Average consumption (kW) | 5 |
| Noise level (Machine Directive 2006/42/EC) (dB) | 70 |
Salvagnini S4 + P4 line - Flexible manufacturing system
The S4+P4 line is one of Salvagnini's most popular solutions. It punches, shears and bends sheet metal totally automatically. The first prototype dates back to 1979 and is a landmark in the development of systems for integrated logistics. It remains the most efficient flexible manufacturing system (FMS) on the market today.
Since the beginning the S4+P4 was and remains the most efficient flexible manufacturing system (FMS) on the market.
Automatic Punching & Bending Line
The example shown is the result of a project developed in partnership, specifically for a company that described its production and logistics requirements to us. We have provided a solution with great flexibility and multiple configurations.
Salvagnini ROBOformER
Salvagnini is the first company to adopt the concepts of lean manufacturing by developing automatic and totally flexible processing systems; and the first to introduce a totally automatic press-brake cell run by a single controller and a single program.